- ページ 39

無線アクセスポイント Cisco 7200 VXR SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7200 VXR Series 48 ページ。 Preparing for installation
Cisco 7200 VXR Series にも：データシート (12 ページ), マニュアル (14 ページ)

ページを印刷する

To replace the CompactFlash Disk in the NPE-G1, see the "Prepare for Installation" section on page 6.

Also see Using the Flash Disk at

http://www.cisco.com/en/US/products/hw/routers/ps341/prod_installation_guide09186a00802a6394.html, and Memory

Replacement Instructions for the Network Processing Engine or Network Services Engine and I/O Controller at

http://www.cisco.com/en/US/products/hw/routers/ps341/products_installation_guide_book09186a00800f0371.html.

Replace the Gigabit Interface Converter

Figure 21

Replacing the GBIC

GBIC

Alignment groove

Step 1

Remove the Gigabit Ethernet Gigabit Interface Converter (GBIC) cables from the GBIC slot on the I/O controller or on

the NPE-G1.

Step 2

Remove the GBIC from the I/O controller or the NPE-G1.

Step 3

Locate the alignment groove (2)on the GBIC. (The label faces up.)

The GBIC is keyed so that it cannot be inserted incorrectly.

Step 4

Insert the GBIC into the slot on the I/O controller or the NPE-G1.

Step 5

Attach the GBIC cables. Also see the "SFP and GBIC Interface Cables Installation" section on page 20.

GBIC slot

Plug

ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER