- ページ 12

無線アクセスポイント Cisco AIR-AP1042N-A-K9のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco AIR-AP1042N-A-K9 35 ページ。

Additional Configuration for the Access Point in

How you configure your access point depends on how you intend to use it in your wireless network.

This section provides a brief synopsis of the configuration process. For detailed information, refer to

the "Configuring the Access Point for the First Time" chapter of the Cisco IOS Software Configuration

Guide for Cisco Aironet Access Points for the Cisco IOS release you are using.

The following basic settings must be configured on your access point.

• Host Name

• Configuration Server Protocol

• IP Address

• IP Subnet Mask

• Default Gateway

• SNMP Community

The following radio settings must be applied separately to each radio.

• Role in Radio Network

• Optimize Radio Network For

• Aironet Extensions

Configuring Security Settings

After you assign basic settings to your access point, you must configure security settings to prevent

unauthorized access to your network. Because it is a radio device, the access point can communicate

beyond the physical boundaries of your work site.

Basic security settings are explained in the "Configuring the Access Point for the First Time" chapter

of the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points for the Cisco IOS

release you are using.

The following security settings are available on the Express Security Setup page.

• No Security

• Static WEP Key

• EAP Authentication

• WPA and WPA2

Advanced security settings are described in appropriate chapters of the Cisco IOS Software

Configuration Guide for Cisco Aironet Access Points for the Cisco IOS release you are using.