- ページ 3

無線アクセスポイント Cisco AIR-AP1232AG-T-K9のPDF データシートをオンラインで閲覧またはダウンロードできます。Cisco AIR-AP1232AG-T-K9 8 ページ。 Aironet 1230ag series 802.11a/b/g access point

ページを印刷する

Features and Benefits

Table 1 lists the features and benefits of Cisco Aironet 1230AG Series access points.

Table 1.

Features and Benefits of Cisco Aironet 1230AG Series Access Points

Feature

Dual 802.11a and 802.11g

Radios

Dual RP-TNC Antenna

Connectors for Both 2.4-GHz

and 5-GHz Radios

Link-Role Flexibility

Cisco Unified IDS/IPS

Management Frame

Protection

Security

Currently Supports 12 Non-

Overlapping Channels, with

Potentially up to 23 Channels

Rugged Metal Housing

UL 2043 Plenum Rating and

Extended Operating

Temperature

Multipurpose and Lockable

Mounting Bracket

Both Local and Inline Power

Support

Hardware-Assisted AES

Encryption

Benefit

Provides up to 108 Mbps of capacity in a single device for industry-leading capacity

and compatibility with older 802.11b clients.

Antenna connectors support a variety of Cisco 2.4-GHz and 5-GHz antennas,

providing range and coverage versatility.

Autonomous access points can function as an access point or bridge, whether set up

as a single-band or dual-band platform, allowing each radio to be individually

configured as an access point repeater, root bridge, non-root bridge, or workgroup

bridge, enabling a broad array of applications.

This integrated software feature is part of the Cisco Self-Defending Network and is

the industry's first integrated wired and wireless security solution. When a trusted

client acts maliciously, the wired IDS detects the attack and sends shun requests to

Cisco WLAN controllers, which will then disassociate the client device.

This feature provides for the authentication of 802.11 management frames by the

wireless network infrastructure. This allows the network to detect spoofed frames

from access points or malicious users impersonating infrastructure access points. If

an access point detects a malicious attack, an incident will be generated by the

access points and reports will be gathered on the Cisco wireless LAN controller,

Cisco WCS, or CiscoWorks WLSE.

Authentication

Security Standards

● WPA

● WPA2 (802.11i)

● Cisco TKIP

● Cisco message integrity check (MIC)

● IEEE 802.11 WEP keys of 40 bits and 128 bits

802.1X EAP types:

● EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

● Protected EAP-Generic Token Card (PEAP-GTC)

● PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)

● EAP-Transport Layer Security (EAP-TLS)

● EAP-Tunneled TLS (EAP-TTLS)

● EAP-Subscriber Identity Module (EAP-SIM)

● Cisco LEAP

Encryption:

● AES-CCMP encryption (WPA2)

● TKIP (WPA)

● Cisco TKIP

● WPA TKIP

● IEEE 802.11 WEP keys of 40 bits and 128 bits

Lower potential interference with neighboring access points simplifies deployment.

Fewer transmission errors deliver greater throughput.

Cast aluminum case and rugged features support deployment in factories,

warehouses, the outdoors (in a NEMA enclosure), and other industrial environments.

Supports installation in environmental air spaces such as areas above suspended

ceilings.

Provides greater flexibility in installation options for site specific options, as well as

theft deterrence.

Power can be supplied using the Ethernet cable, eliminating the need for costly

electrical power line runs to remotely installed access points. The access points can

be powered by Cisco inline power switches, single port power injectors, or local

power.

Provides high security without performance degradation.

Data Sheet

Page 3 of 8