- ページ 9

ネットワーク・ルーター 3Com 3C13640のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。3Com 3C13640 17 ページ。 3000 adsl2 plus family

3Com Router 3000 ADSL2+ Family Getting Started Guide

Connecting the Router to a Console Terminal

The console cable has an RJ45 connector at one end and a DB9 (socket) connector at the other

end.

Follow these steps to connect the router to a console terminal:

Step 1: Select a console terminal. The console terminal can be either a standard ASCII terminal

with an RS-232 serial interface or more commonly, a PC.

Step 2: Power off the router and the console terminal, and then connect the RS-232 serial port on

the console terminal to the console port on the router using the console cable. Verify the

connection and power on the router. In normal cases, the startup information is displayed

on the terminal screen.

The 10/100 Ethernet LAN interfaces on the Router 3000 support MDI/MDIX auto-sensing.

Therefore, you can connect your router to another device using either a straight-through or

crossover cable regardless of whether the two devices are the same type.

Caution:

In preparing network cables, shielded cables are preferred for the sake of electromagnetic

compatibility.

After you complete installation, verify that:

•

The proper power supply is used.

•

The grounding wire of the router is correctly connected.

•

The console cable and the power cord are correctly connected.

Console cable assembly

RJ-45 Ethernet cable