- ページ 4

無線アクセスポイント Cisco AIR-AP1800I-B-K9のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco AIR-AP1800I-B-K9 43 ページ。

Access Point Features

A full listing of the access point's features and specification are provided in the Cisco Aironet 1800i

Access Point Data Sheet at the following URL:

https://www.cisco.com/c/en/us/support/wireless/aironet-1800i-access-point/model.html

The features of the 1800i access points are as follows:

• Supported mode(s) of operation at release:

Unified (or Local)

–

• Two omnidirectional integrated 2.4 GHz dual-band antennas and 5 GHz single band antennas.

Peak antenna gain is approximately 3 dBi and 5 dBi in 2.4 GHz and 5 GHz bands respectively.

• Radio features supported are:

2.4 GHz and 5 GHz concurrent radios

–

2 GHz radio with 2TX x 2RX and two spatial streams SU-MIMO

–

5 GHz radio with 2TX x 2RX 802.11ac Wave 2 capable with two spatial streams SU-MIMO

–

and MU-MIMO

802.11ac based Explicit Transmit Beamforming

–

Quality of Service (QoS)

–

Radio Resource Management (RRM)

–

Rogue Detection

–

BandSelect

–

• The AP supports the following external interfaces:

One 10/100/1000 BASE-T (Ethernet) Uplink Interface with inline power capability,

–

Auto-MDIX (automatically support either straight through or crossover cables), and

802.3af/at PoE-In.

UART console port connection using the custom UART–RJ45 console cable adapter,

–

AIR-CONSADPT=. This adapter is available from Cisco.

• Reset button. For information on how to use the Reset button, see

section on page

• One multi-color LED status indicator. See the

page 19

for information on the colors of the LED status indicator.

21.

"Checking the Access Point LED" section on

"Using the Reset Button"