- ページ 10

スピーカーシステム CABASSE ALCYONE -のPDF マニュアルをオンラインで閲覧またはダウンロードできます。CABASSE ALCYONE - 17 ページ。 5.1 audio video system
CABASSE ALCYONE - にも：パンフレット (4 ページ), パンフレット (7 ページ)

ページを印刷する

e n g l i s h

Exposure to high

temperatures -

be kept away from heating sources, such as radiators, heaters,

amplifiers or any other similar item likely to make the operat-

ing temperature rise excessively.

UNPACKING

Open

carton flaps; leave one by one all the components. If

the speakers or the subwoofer appear damaged, do not use

them. Repack everything in the original packing and contact

your authorized Cabasse dealer immediately. We suggest you

to retain the packing for future use.

Caution ! Handle with care the 22 lb (10

Use good lifting practice to avoid injury.

Caution !

To avoid electric shock or fire hazards, do not expose

speakers to rain or moisture.

Caution !

To avoid danger of suffocation keep the plastic bags that

wrap these speakers out of the reach of children.

SETTING UP

THE

COMPONENTS OF YOUR SYSTEM

5 Alcyone

speakers, 5 sets for use on bookshelf, 5 wall sup-

ports, screws to fix the supports.

1 Santorin 17 active

subwoofer, 1 CINCH cable, 5 loud-

speaker cables ( 3 x 6 m / 20 ft - 2 x 12 m / 40 ft), 4 spikes for

the subwoofer.

The Alcyone speaker can be placed on a shelf

fixed on the optional stand

POSITIONNING 5

Alcyone

speakers have all the same technical features; they

can be used on any channel. All the speakers are magnetically

shielded to prevent interference with the image of your tele-

vision set; they can thus be placed near any screen.

No solid object or piece of

between the speakers and the listener.

Front left and right speakers must be directed towards the

listening area and placed on either side of the screen with at

least a distance of 7 ft and 16 ft (2 and 5 m) between the 2

speakers.

The

centre satellite should be placed as close as possible to

the screen: on the top, below, or directly on your television

set. Place the satellite at the vertical of the screen for a per-

fect cohesion and precision between dialogues and picture.

Surround speakers should be placed against the side walls,

at listening height or higher if possible and slightly behind the

listening area.

The Alcyone

subwoofer should be placed in the front listen-

ing area, with the 4 spikes on. If the floor is fragile (wood,

marble...) use the 4 cups delivered with the spikes.

To get the best result, it is always necessary to carry out tests

according to the acoustics of the room. To prevent interfer-

ence with the screen of your television set, place the sub-

woofer at least 2 ft (0.6m) of your television set.

The

device should

kg) of the subwoofer.

fixed on a wall

furniture should be placed

CONNECTIONS 6

bis

Caution ! Before making

any connection turn off your AV amplifier

and unplug it from the outlet. Not doing so may result in damage to

your system.

Caution ! It is

imperative before any connection to respect the setting

in phase by connecting the terminals +/red of the AV amplifier to the

terminal +/red of the speakers. Proceed then in the same way for ter-

minals -/black.

Connect the LINE INPUT

terminal of the subwoofer to the

output SUBWOOFER/LFE of the AV amplifier using the CINCH

cable.

Check all the connections carried out on the speakers, the

subwoofer and the amplifier. Ensure that each speaker is con-

nected according to its position in the room. Check that all the

speakers are well in phase (+/red in +/red and -/black in -

/black). Once this checking made you can connect your ampli-

fier and the subwoofer to the sector.

Caution !

To prevent the risks of electric shock take care to com-

pletely insert plugs of sector cords.

SUBWOOFER ADJUSTING

Take care of positioning the sector switch 110V/220V on the

right position according to your country.

The switch ON/OFF (located on the back) of the subwoofer

has 3 positions:

AUTO:

Automatic, the

system is put automatically on ON or

OFF according to the presence of signal coming from the AV

amplifier. Put the switch ON/OFF on AUTO or ON position.

OFF

CROSSOVER:

adjust the

potentiometer on 250 Hz.

VOLUME:

the adjustment of the volume will depend upon

room positioning, type of amplifiers... With Alcyone SYSTEM

the average position of the LEVEL potentiometer is on a "2

o'clock" position. For an optimum adjustment of the volume,

we advise you to carry out it starting from a stereo source

(CD). Then use the TEST TONE of your AV amplifier to adjust

the level of channel SUBWOOFER/LFE.

PHASE: usually it is

necessary to position the potentiometer

on 0°, however 2 positions can be used 0° and 180 °.

- adjust the potentiometer on 0° when the subwoofer and the

front speakers are positioned at the same distance of the lis-

tening area.

- adjust the potentiometer on 180° when the subwoofer is

positioned 5 ft (1.5m) ahead or behind the front speakers.