- ページ 8

スピーカーシステム CABASSE BALTIC EVOLUTIONのPDF マニュアルをオンラインで閲覧またはダウンロードできます。CABASSE BALTIC EVOLUTION 12 ページ。
CABASSE BALTIC EVOLUTION にも：パンフレット (6 ページ)

ページを印刷する

1. Technical Data

e n g l i s h

With Baltic Evolution, Cabasse proposes a Hi Fi / audio video system with the Cabasse SCS

technlogy (Spatially Coherent System). Baltic Evolution comes from the high end ARTIS

range, with a specific 3-ways tri-axial driver, the TC23. With these 3-way speakers combined

with a Cabasse Cabasse active subwoofer, you can get a very high quality system, either in a 2.1

configuration (standard stereo) or in a 5.1 configuration (5 channels system) or 6.1 or 7.1...

Depending on your system - stereo or multi-channel - the size of the listening room,

your taste and demand, your Artis dealer will guide you in selecting your Cabasse subwoofer(s):

Santorin 25, Santorin 30, Thor II, Largo or Saturn 55.

INSTALLATION

The components of your system:

2, 3, 5, 6 or 7 Baltic Evolution

■

1 Cabasse Cabasse active subwoofer

■

Baltic Evolution on wall version

The wall bracket of Baltic Evolution on wall has been desi-

gned to allow a convenient positioning of the TC23 driver in

many directions +/- 39° in any direction, and to give the pos-

sibility to hide the speaker cable in the wall with no apparent

bolts or screws

. Please follow step by step the instructions

as shown in

Baltic Evolution on base version

Baltic Evolution on base is delivered with a little cradle, pose

the sphere Baltic Evolution on this cradle. This system enables

you to put Baltic Evolution on a bookshelf.

Floor standing Baltic Evolution

The stand version is supplied with adjustable spikes for a per-

fect stability even if the floor is not horizontal.

Positioning of Baltic Evolution

Positioning of the speakers: if possible, try to match with the

drawing, with the Cabasse subwoofer in the front area

facing the listening spot. Its position against a wall reinforces

the extreme low register and limits the reflections between 80

and 200 Hz. However to obtain the best result, it is always

necessary to carry out tests according to the acoustics of the

room.

CONNECTIONS

It is imperative to respect the correct phasing when connecting:

+ to + (red) and - to - (black).

Configuration 2.1

2 Baltic Evolution + 1 Cabasse subwoofer

■

Connect with speaker cables the amplifier outputs to the ter-

minals HIGH LEVEL INPUT L (left) and HIGH LEVEL INPUT R

(right) of the Cabasse subwoofer and connect the outputs

HIGH LEVEL OUTPUT L (left) and HIGH LEVEL OUTPUT R

(right) of the Cabasse subwoofer to the Baltic Evolution inputs

Configuration 5.1

5 Baltic Evolution + 1 Cabasse subwoofer or

■

2 main speakers + 3 Baltic Evolution + 1 Cabasse

■

subwoofer

When the processor of your audio video amplifier includes a

2.1 set-up (subwoofer for stereo reproduction), connect each

speaker output of the 5.1 amplifier directly to the matching Bal-

tic Evolution (front right, front left, centre, surround...). Connect

the subwoofer CINCH RCA output of the amplifier to one of

the CINCH RCA LINE IN terminals of the Cabasse subwoofer

Then adjust the set-up menu of your audio video amplifier:

5 Baltic Evolution + 1 Cabasse subwoofer

FRONT

CENTER

SURROUND

SUBWOOFER / LFE

2 main speakers + 3 Baltic Evolution + 1 Cabas-

se subwoofer

FRONT

CENTER

SURROUND

SUBWOOFER / LFE

*Adjustment in SMALL or LARGE, according to their ability in

reproducing deep low frequencies.

Some audio video amplifiers require these information:

SUBWOOFER

SUBWOOFER stereo

If your audio video has an adjustable crossover frequency, the

adjustment will be 80 Hz.

SMALL

YES

SMALL ou LARGE*

SMALL

YES

ONLY

YES