配管製品 Argent EURAのPDF ケア＆インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Argent EURA 2 ページ。 Basin mixers

EURA

BASIN MIXERS

NOTES PRIOR TO INSTALLATION

1. INSPECT ALL PARTS PRIOR TO INSTALLATION FOR

SUITABILITY AND/ OR DEFECTS

2. ANY SUSPECTED DEFECT SHOULD BE REPORTED AS

SOON AS POSSIBLE

3. SHOULD ANY PRODUCT BE INSTALLED DESPITE A FAULT

HAVING BEEN FOUND AND REPORTED, ARGENT WILL

NOT ACCEPT LIABILITY FOR THE COST OF LABOUR TO

REMOVE AND INSTALL ANY REPLACEMENT PRODUCT/S

NOTES FOR INSTALLATION

1. Please ensure pipework is clear of debris by flushing

lines prior to installation.

2. We recommend hot and cold water isolation stops are

used – not included in supply.

PRESSURE AND TEMPERATURE REQUIREMENTS

1. Inlet pressure range 100 – 500kpa

2. Maximum hot water temperature 60 C

3. AS/NZS 3500 requires 500 kPa maximum operating

pressure at any outlet within a building

4. Hot & Cold inlets should have equalised water

pressures.

STEP 1

• Where the mixer is going into a stone or

laminate top, cut a 35mm ø hole.

Technical Hotline

1800 356 717

STEP 2

• Install the allthread screw into the

bottom of the basin mixer.

• Install basin mixer sealing O ring &

flange(if supplied)

Customer Central

1300 364 748

Eura Basin Mixers

Care & Installation Guide

21008

ASNZ 3718

Please direct any

feedback for this product

to Customer Central:

support@customer-

central.com.au or call

1300 364 748