- ページ 13
無線アクセスポイント Cisco Aironet 1200 SeriesのPDF アップグレードマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1200 Series 36 ページ。 Ordering guide
Cisco Aironet 1200 Series にも： 設定マニュアル (40 ページ), 注文マニュアル (6 ページ)
ページを印刷する
b. Grasp the card only by its edges, being careful not to touch
components on the board or the gold connector pins.
c. Remove the card from the mini-PCI connector.
3. Place the card into an anti-static bag.
Installing a 2.4-GHz Radio Card
Follow these steps to install a 2.4-GHz radio card in the access point.
Caution
The internal access point components and the 2.4-GHz radio
can be damaged by ESD from improper handling.
1. Carefully remove the 2.4-GHz radio card from its anti-static bag.
2. Grasp the radio card only by its edges, being careful not to touch
components on the board or the gold connector pins.
3. Connect the black wire's antenna connector to the radio card antenna
connector marked by the black label.
4. Connect the white wire's antenna connector to the radio card antenna
connector marked by the white label.
13