- ページ 11
無線アクセスポイント Cisco Aironet 1520 SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Aironet 1520 Series 37 ページ。 Outdoor mesh access point
Cisco Aironet 1520 Series にも： ハードウェア・インストール・マニュアル (50 ページ), マニュアル (27 ページ)
ページを印刷する
To reduce potential radio interference to other users, the antenna type and its gain should be
Note
chosen so that the equivalent subtropical radiated power (EIRP) is not more than required for
successful communication.
Table 1 lists the supported external 2.4- and 5-GHz antennas.
Table 1
External 2.4- and 5-GHz Antennas
Part Number
AIR-ANT2450V-N
AIR-ANT2480V-N
AIR-ANT5180V-N
AIR-ANT58G10SSA-N
AIR-ANT5114P-N
AIR-ANT5117S-N
1. The compact omnidirectional antennas mount directly on the access point.
2. The compact omnidirectional antennas mount directly on the access point.
3. Use of the 4.9-GHz band requires a license and may be used only by qualified Public Safety operators as defined in
section 90.20 of the FCC rules.
Antenna Configurations
Two antenna configurations are available, based on how the access point is mounted. The cable strand
mounting configuration uses three antennas and the tower mount configuration uses four antennas.
Table 2 identifies the antenna ports used and explains the configurations.
Table 2
Antenna Ports and Configurations
Product Configuration
Antenna Port
Cable Strand Mount
(Two Antenna Receive MRC Access and
One Backhaul)
1
2.4-GHz receive only
2
5-GHz transmit and receive
3
2.4-GHz transmit and receive
Model
2.4-GHz compact omnidirectional
2.4-GHz omnidirectional
5-GHz compact omnidirectional
4.9-GHz compact omnidirectional
5-GHz sector
4.9- to 5-GHz patch
4.9- to 5-GHz 90-degree sector
Gain (dBi)
1
5.5
8.0
2
8.0
3
7.0
9.5
2
14.0
2
17.0
Pole Mount
(Three Antenna Receive MRC Access and
One Backhaul)
5-GHz receive and transmit
No connection
2.4-GHz receive only
11