- ページ 6

スイッチ DigitaLinx DL-HDS41のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DigitaLinx DL-HDS41 13 ページ。 4x1 hdmi switcher

Features

High Quality Picture – No loss of resolution or introduced digital artifacts

Our switchers are manufactured to deliver the highest quality picture by

preserving the native resolution from the video sources and eliminating any

digital artifacts (pixel loss or "sparklies"). Due to the nature of digital signals any

non-active connector junctions will detrimentally aﬀect the signal, this device

provides active junctions to re-constitute and amplify the signal (boosting) and

ensures the signal quality to the display.

Signal Ampliﬁcation

Each switching device is powered by a 5V external power supply to ensure

adequate power is available to perform the signal boost to the correct

speciﬁcation. This is necessary because the introduction of a switcher indicates

that longer cable lengths are in use. This device corrects the signal loss from

a longer length cable to the original native resolution and signal power. The

maximum length of an interconnect cable recommended for this device is

15 meters. The 15 meter cable must be certiﬁed to perform to the required

resolution. All Liberty Wire & Cable HDMI interconnects are tested to ensure

1080p resolution.

Compact and Practical Design

The DigitaLinx™ Switch is designed with all inputs and outputs located on

the rear of the device. This will allow the device to be mounted in a rack and

eﬃciently route the cabling. The front of the device contains the IR remote

sensor, manual switch and LED indicator lights for RS232 and

channel indicators.

IR Remote Control

Each DigitaLinx™ is shipped with a convenient IR remote with a discrete

channel selection feature. This allows input selection to be changed quickly

and easily.

RS232 Control

The RS232 control input is incorporated into all switches to allow control by

a remote computer. This is helpful in switching applications where the video

inputs require automatic switching. The PC can control the unit to switch at

predetermined times and view video sources in set time intervals. The RS232

LED indicators on the front of the unit allow monitoring of the RS232 function.

The computer or control device may require additional software for various

other functions. (Software not included.)

1-4

Features