- ページ 14

ウェザーステーション ACU-RITE 01141のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ACU-RITE 01141 20 ページ。 Professional weather center

Troubleshooting

Problem

No outdoor sensor

reception

no bars

Outdoor

temperature

is flashing or

showing dashes

Inaccurate forecast

• Relocate the display and/or the 5-in-1 sensor.

The units must be within 330 ft (100 m) of each

other.

• Make sure both units are placed at least 3 feet

(.9 m) away from electronics that may interfere

with the wireless communication (such as TVs,

microwaves, computers, etc).

• Use standard alkaline batteries (or lithium

batteries in sensor when temperature is

below -4ºF/-20ºC). Do not use heavy duty

or rechargeable batteries. NOTE: It may

take a few minutes for display and sensor to

synchronize after batteries are replaced.

• Synchronize the units:

1. Bring both the sensor and display indoors and

remove batteries/power adapter from each.

2. Reinstall batteries in outdoor sensor.

3. Reinstall batteries/power adapter in display.

4. Let the units sit within a couple feet of each

other for a few minutes to gain a strong

connection.

Flashing of the outdoor temperature may be an

indication of wireless interference.

• Make sure the A-B-C switch in the battery

compartments of both the display and sensor are

switched to the same letter. You may choose A, B or

C; but both units must match to sync up. Sometimes

changing to a different channel can help.

• Weather Forecast icon predicts conditions for

the next 12 to 24 hours, not current conditions.

• Allow unit to run continuously for 33 days.

Battery removal or resetting the display will

restart Learning Mode. After 14 days, forecast

should be fairly accurate, however Learning

Mode calibrates for a total of 33 days.

Possible Solution