- ページ 7

ウェザーステーション ACU-RITE 01141のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ACU-RITE 01141 20 ページ。 Professional weather center

SETUP

Set the A-B-C Switch

Locate the A-B-C switch inside the

battery compartment. Set the A-B-C

switch to A, B or C. You must select

the same letter choices for both the

sensor and the display in order for

the units to synchronize.

Install or Replace Batteries

Batteries MUST be installed for

this product to operate. AcuRite

recommends high quality alkaline

or lithium batteries for the best

product performance. Heavy duty

or rechargeable batteries are not

recommended.

The 5-in-1 sensor requires lithium

batteries in low temperature

conditions. Cold temperatures can

cause alkaline batteries to function

A B C

A-B-C Switch

Set to match

display

Install Batteries

4 AA Batteries

improperly. Use lithium batteries in

the 5-in-1 sensor for temperatures

below -4ºF/-20ºC.

1. Slide off the battery

compartment cover.

2. Insert 4 x AA batteries into the

battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Remove Rain Gauge Stabilizer

Locate and remove the rain gauge

stabilizer (plastic tab) taped into

the bottom of the sensor. The rain

gauge will not function until this is

removed.

Rain Gauge Stabilizer

Remove and discard