- ページ 10

オール・イン・ワン・プリンター Epson AcuLaser CX11NのPDF 基本操作グードをオンラインで閲覧またはダウンロードできます。Epson AcuLaser CX11N 26 ページ。 Multi-function colour laser printers
Epson AcuLaser CX11N にも：ユーザーマニュアル (17 ページ), 仕様 (4 ページ), セットアップマニュアル (32 ページ), スタート・ヒア・マニュアル (8 ページ), 補足マニュアル (6 ページ), 更新 (1 ページ), 製品サポート速報 (5 ページ), 仕様 (4 ページ)

ページを印刷する

Follow the steps below to make a copy.

1. Make sure the product is turned on and

paper is loaded in the product. For

details, see the User's Guide.

2. Press the

Copy button on the

control panel.

The Copy light is lit and the LCD panel

shows Copy Mode for a few seconds, and

then changes to the copy mode screen.

Note:

If no button is pressed for more than 3

minutes, any changes made are canceled and

the mode returns to the Print mode.

3. Place your original either on the

document table or in the Auto Document

Feeder (fax model only). For details, see

"Setting your originals."

4. Specify the desired copy settings if

necessary. For details, see the User's

Guide.

Note:

When you press the x B&W Start or

x Color Start button without making any

settings here, copying starts with the

existing setting values.

EPSON AcuLaser CX11 Series Basic Operation Guide

Canceling copying

5. Press the x B&W Start or x Color Start

button.

To make a black-and-white copy, press

the x B&W Start button. To make a color

copy, press the x Color Start button.

Copying starts.

Note:

❏ Do not turn off the power or press

another mode's button while copying is

in progress, as copying may be

performed incorrectly.

❏ When you place multiple documents in

the Auto Document Feeder and make a

continuous high quality (600 dpi) color

copy with the default memory (128 MB),

the product may not work properly

because of insufficient memory. We

recommend adding an memory module

so that the total memory size is 256 MB

or higher.

When the y Cancel button on the control

panel is pressed while a document is being

copied, the LCD panel shows Cancel Print

Job and the copy job is canceled.

Basic Copying