- ページ 9

錠前 DigitalKeys NB IoTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。DigitalKeys NB IoT 11 ページ。 5g iot smart padlock

Manual

Time Zones

The 5G IoT smart locks use local internet time, which can be set when the locks are first set-up and

commissioned by our local distributors. Locks can be programmed to work for a minimal 30 minute

timeslot. When the programmed time for the digital keys expires, the unlock icon will disappear from the

digital keys app, and the digital key will show as 'expired' in the access management software.

The 5G IoT smart locks only work with special Digital Keys NFC cards/tokens. The product will not work

with any NFC cards bought online from third parties, or from non-certified 5G IoT smart lock re-sellers. 2

NFC tokens are provided in every pack. Please contact Digital Keys or your local distributor/re-seller if you

need to buy more keycards/tokens.

1. Loosen the small screws on each of the four corners on the back of the lock, with provided security

screwdriver.

2. Carefully lift the cover and circuit board up to reveal the battery pack.

3. Remove old batteries and place new batteries correctly into the compartment.

4. Close the cover and screw shut again.

Note: No digital keys are deleted during the battery changeover.

A live battery status is shown in the access management software (please see section 2 User guide for

more information). Account administrators can set up email notifications for when battery status gets below

10%.

The 5G IoT smart padlocks are maintenance-free. At no time may they be oiled or greased with lubricants

containing mineral oil. Cleaning may only be carried out with non-stick, residue-free cleaning and

Page 9 of 11

5G IoT Smart Padlock