- ページ 30

オール・イン・ワン・プリンター Epson Artisan 730のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson Artisan 730 36 ページ。 Color inkjet printer
Epson Artisan 730 にも：クイック・セットアップ手順 (4 ページ), 仕様 (2 ページ), ここからスタート (4 ページ), サービスマニュアル (20 ページ)

ページを印刷する

Notices

Important Safety Instructions

Before using your Epson product, read and follow these safety instructions:

■

Be sure to follow all warnings and instructions marked on the product.

■

Use only the type of power source indicated on the product label.

■

Use only the power cord that comes with the product. Use of another cord may cause fires or

electric shock. Do not use the cord with any other equipment. Make sure the power cord meets

all relevant local safety standards.

■

The product's power cord is for use with the product only. Use with other equipment may

cause fire or electric shock.

■

Place the product near a wall outlet where the plug can be easily unplugged.

■

If you won't be using the product for a long period, unplug the power cord from the electrical

outlet.

■

Always turn off the product using the

flashing before unplugging the product or cutting off power to the electrical outlet.

■

Avoid plugging the product into an outlet on the same circuit as a photocopier or air

conditioning system that regularly switches on and off, or on an outlet controlled by a wall

switch or timer.

■

Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying,

crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or

run over. Be careful to keep the cord straight at each end. If damage occurs to the plug, replace

the cord or consult a qualified electrician. If there are fuses in the plug, make sure you replace

them with fuses of the correct size and rating.

■

If you use an extension cord with the product, make sure the total ampere rating of the devices

plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the

total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's

ampere rating.

■

When connecting the product to a computer or other device with a cable, ensure the correct

orientation of the connectors. Each connector has only one correct orientation. Inserting a

connector in the wrong orientation may damage both devices connected by the cable.

■

Place the product on a flat, stable surface that extends beyond its base in all directions. It will

not operate properly if it is tilted or at an angle.

■

Avoid placing the product in locations that are subject to rapid changes in heat or humidity,

shocks or vibrations, or dust. Do not place the product near a radiator or heating vent or in

direct sunlight. Do not place or store the product outdoors.

■

Keep the product away from potential sources of electromagnetic interference, such as

loudspeakers or the base units of cordless phones.

Notices

button, and wait until the

light stops