- ページ 21
オール・イン・ワン・プリンター Epson C11CA30201 - Artisan 700 Photo All-in-One PrinterのPDF 機能マニュアルをオンラインで閲覧またはダウンロードできます。Epson C11CA30201 - Artisan 700 Photo All-in-One Printer 28 ページ。 Using the control panel for wireless network installation
Epson C11CA30201 - Artisan 700 Photo All-in-One Printer にも: ネットワーク・インストレーション・マニュアル (41 ページ), 重要なセットアップ情報 (3 ページ), 仕様 (2 ページ), クイック・スタート・マニュアル (8 ページ), 製品サポート速報 (5 ページ)
12. Click
.
OK
13. Click
again to close the EPSON Scan Settings window.
OK
Note:
If the printer's IP address changes, you will need to repeat steps 1 through 13
to reconfigure Epson Scan network settings.
You're ready to scan and print. See your printed documentation and on-screen
Epson Information Center for details.
Troubleshooting
If you have problems setting up or using your product on a network, check these
sections for help:
■
"Setup Problems" below
■
"Printing Problems" on page 23
■
"Scanning Problems" on page 24
This section also explains how to print a Network Status Sheet (see page 25) and
reset network settings (page 26).
Setup Problems
Software installation failed
Reset the printer's network settings (see page 26) and perform a first-time
installation of the printer and software (see page 3).
Cannot connect to or find the wireless router or access point
■
Try connecting to the wireless router or access point with your computer or
another device to confirm that it is working correctly.
■
Make sure that the printer is within range of your wireless router or access
point.
■
Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or
large metal object such as a filing cabinet.
Troubleshooting
21