- ページ 8

無線アクセスポイント Cisco Meraki MR36HのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Meraki MR36H 22 ページ。

31/01/2022, 19:00

Orange - AP is booting (permanent Orange suggests hardware issue)

Blinking Orange - AP can't nd uplink

Rainbow - AP is initializing/scanning

Blue - AP in Gateway mode with clients

Blinking Blue - AP is upgrading

Green - AP in Gateway mode with no clients

Ethernet Status

The MR36H features four green Ethernet status LEDs near the bottom of the faceplate. When an Ethernet

client is connected, the LED will shine through the faceplate if Run Dark mode is not enabled.

Run Dark Mode

The MR36H may be operated in "Run Dark" mode for additional security and to reduce the visibility of the

access point. In this mode, the LED will not be illuminated. This mode may be

dashboard.

When a MR36H is rebooted with rundark mode enabled, an orange LED will illuminate during boot then all

lights will be turned off after boot.

Safety and Warnings

These operations are to be taken with respect to all local laws. Please take the following into consideration for

safe operation:

Power off the unit before you begin. Read the installation instructions before connecting the system to the

power source.

Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents.

Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct

hardware or to follow the correct procedures could result in a hazardous situation to people and damage to

the system.

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than: 15 A, 125 Vac, or 10A, 240 Vac.

Please only power the device with the provided power cables or standard PoE to ensure regulatory

compliance.



Pre-Install Preparation

How can we help you?

https://documentation.meraki.com/MR/MR_Installation_Guides/MR36H_Installation_Guide

MR36H Installation Guide - Cisco Meraki

con gured

through the Meraki



8/21