- ページ 8

無線アクセスポイント Cisco Meraki MR52のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Meraki MR52 17 ページ。 Dual-band enterprise class 802.11ac wave 2 cloud-managed access point
Cisco Meraki MR52 にも：ハードウェア・インストール・マニュアル (25 ページ)

ページを印刷する

Dynamic Assignment

When using DHCP, the DHCP server should be configured to assign a static IP address for each MAC address

belonging to a Meraki AP. Other features of the wireless network, such as 802.1X authentication, may rely on the

property that the APs have static IP addresses.

Static Assignment

Static IPs are assigned using the local web server on each AP. The following procedure describes how to set the

static IP:

1. Using a client machine (e.g., a laptop), connect to the AP wirelessly (by associating to any SSID

broadcast by the AP) or over a wired connection.

2. If using a wired connection, connect the client machine to the AP either through a PoE switch or a PoE

Injector. If using a PoE switch, plug an Ethernet cable into the AP's Ethernet jack, and the other end into

a PoE switch. Then connect the client machine over Ethernet cable to the PoE switch. If using a PoE

Injector, connect the AP to the "PoE" port of the Injector, and the client machine to the "LAN" port.

3. Using a web browser on the client machine, access the AP's built-in web server by browsing

to http://my.meraki.com. Alternatively, browse to http://10.128.128.128.

4. Click on the "Uplink Conﬁguration" tab. Log in. The default login is the serial number (e.g. Qxxx-xxxx-

xxxx), with no password (e.g., Q2DD-551C-ZYW3).

5. Configure the static IP address, net mask, gateway IP address and DNS servers that this AP will use on

its wired connection.

6. If necessary, reconnect the AP to the LAN.

Static IP via DHCP Reservations

Instead of associating to each Meraki AP individually to configure static IP addresses, an administrator can

assign static IP addresses on the upstream DHCP server. Through "DHCP reservations," IP addresses are

"reserved" for the MAC addresses of the Meraki APs. Please consult the documentation for the DHCP server to

conﬁgure DHCP reservations.

Collect Tools

You will need the following tools to perform an installation: