- ページ 11

無線アクセスポイント Cisco Meraki MR52のPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Meraki MR52 25 ページ。 Dual-band enterprise class 802.11ac wave 2 cloud-managed access point
Cisco Meraki MR52 にも：インストレーション・マニュアル (17 ページ)

ページを印刷する

Installation Instructions

4.1 Choose Your Mounting Location

A good mounting location is important to getting the best performance out of your MR52 access point.

Keep the following in mind:

1. The device should have unobstructed line of sight to most coverage areas. For example, if installing

in an office filled with workspaces divided by mid-height cubicle walls, installing on the ceiling or high

on a wall would be ideal.

2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).

3. If being used in a mesh deployment, the MR52 should have line of sight to at least two other Meraki

devices. For more detailed instructions regarding access point location selection, reference the Meraki

Network Design Guide (meraki.com/library/product).

4.2 Install the MR52

For most mounting scenarios, the MR52 mount plate provides a quick, simple, and flexible means of mounting

your device. The installation should be done in two steps. First, install the mount plate to your selected location.

Then, attach the MR52 to the mount plate.

4.2.1 Attach the Mount Plate

The MR52 mount plate can be used to install your access point in a wide range of scenarios: wall or solid

ceiling, below a drop ceiling, on various electrical junction boxes, or above a drop ceiling (in the plenum).

The mount plate contains a variety of hole patterns that are customized for each installation scenario. The

mounting template (included inbox with mount plate) should be used to drill holes for wall mounts and also to

identify the correct hole patterns in the mount plate that should be used for each type of mount.

The following images also show the hole patterns that should be used for each type of mount: