- ページ 8

エアコン Argo ADIAS19DCのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Argo ADIAS19DC 17 ページ。 Split air conditioner system
Argo ADIAS19DC にも: 取付説明書 (19 ページ)

What does the NIGHT mode mean?
EN
When you select the NIGHT mode, the air conditioner will
modify automatically the set temperature after 60 minutes.
This enables you to save energy without sacrificing your
comfort.
OPERATING MODE
Heating
Cooling and Dry
NOTA
During the night mode the internal fan speed is
automatically lowered and reduces the noise.

ENERGY SAVING MODE (ECO)

This program is used to limit the maximum electrical power
absorbed by the unit.
When the energy saving program is selected, the air conditioner
limits the absorbed power to 75% of the maximum power. This
limit can be set by modifying parameter P12 on the remote
control (see paragraph "Parameters setting").
To activate the Energy save mode:
1. Press the button
or dehumidification.
2. Press the button
3. The symbol
appears on the display. Press the button
again to release the function.
NOTE
This function is active only if the outdoor unit has an
updated software version.

TURBO MODE

This program is used to increase the maximum power that
can be supplied by the air conditioner, even if it involves less
silence.
To activate the Turbo mode:
1. Press the button
2. Press the button
3. The symbol
appears on the display. Press the button
again to release the function.

TIMER SELECTION

To select the timer, press the button
remote control, then press the button
desired schedule:
delayed timer
NOTE
In the event of a power failure and restoration, the timer
selection must be performed again.

RESET BUTTON

Press the RESET button on the back of the remote control if
you want to reset all settings and return to the factory setting.
SET TEMPERATURE CHANGE
Lowered by 2 °C
Raised by 1 °C
to set the air conditioner in cooling
.
to set the air conditioner in cooling .
.
to switch on the
to chose the
1
2
3
or "OFF"
timer schedule
RESET

HOW TO SET SCHEDULES

A) DELAYED TIMER
This timer is used to start the unit (if it
is off) or to stop the unit (if it is on) after
a certain time, to set the delayed time.
1. Press the Timer
seconds.
2. Press the arrow "up"
delayed timer
.
3. Press the button
indication starts flashing; set the hour
with the arrows.
4. Press the button
indication starts flashing; set the minutes
with the arrows.
5. Confirm with the button
the button
to exit the delayed timer
menu.
1
2
B) SCHEDULE
This timer is used to turn the unit on and
off at predefined times and days.
1. Press the Timer
seconds.
2. Press the arrow "up"
schedule to be set (
3. Press the button
starts flashing.
4. Press the button
again: AM indication
starts flashing (you can choose AM or
PM with the arrows).
5. Press the button
: the hour indication
starts flashing; set the desired hour with
the arrows.
6. Press the button
indication starts flashing; set the minutes
with the arrows.
7. Press the button
starts flashing.
8. Repeat the same procedure to set AM
or PM, hour and minutes.
9. At this point, press the "up"
and WEEK will start flashing.
9. Press the button
the first day of the week starts flashing;
set ON or OFF with the arrows, then
confirm with the button
9. The indication of the second day of
the week starts flashing: repeat the
procedure with every day of the week,
if desired.
10. At the end press
NOTE
It is possible to set up to 3 weekly schedules at different
times using the timers.
8
button for a few
to select the
ARROWS
: the hour
again: the minutes
, then press
3
button for a few
to select the
WEEK
S
2
3
1
,
or
) .
: ON indication
ARROWS
again: the minutes
: OFF indication
arrow
WEEK
S
M
: the indication of
.
to exit the menu.
M
T
W
T
F
S
1
T
W
T
F
S
1