- ページ 2
オール・イン・ワン・プリンター Epson C11CG92301のPDF ここからスタートをオンラインで閲覧またはダウンロードできます。Epson C11CG92301 4 ページ。
ページを印刷する
4
Wait for the ink to fill the tank. Do not squeeze the bottle.
Note:
If ink does not flow from the bottle, lift and reinsert the
bottle.
Caution:
After setup, periodically inspect the ink level to ensure
it is not below the lowest line on the tank. Prolonged use when
ink is below the lowest line could damage the product. See the
online User's Guide for refilling instructions.
5
When the ink bottle is empty, remove the bottle and
securely close it with the cap.
Note:
Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak.
6
Close the ink tank cap.
7
Close the ink tank cover.
8
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
9
Press the
power button to turn on the product, then
wait for the
power light to stop flashing.
Note:
If an error code appears, turn off the product and check
that no protective material has been left inside the product.
10
Select your language, country, time, and date settings on
the LCD screen.
Note:
You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
11
When the message to see the Start Here sheet appears
on the LCD screen, press and hold the
5 seconds.
12
Follow the on-screen instructions to start charging the ink.
Ink charging takes approximately 10 minutes. A message
appears when ink charging is complete. Select OK to
continue.
Caution:
Do not turn off the product, raise the printer cover, or
load paper while the product is charging or you'll waste ink.
Note:
After some ink is used for charging, the rest is available
for printing.
13
Follow the on-screen instructions to adjust the print
quality. Select OK to continue.
Note:
• You need to load paper before you can adjust the print quality.
See "Load paper" below for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User's Guide.
3
Load paper
See the online User's Guide for information about loading
capacity, available paper types and sizes, loading envelopes,
and using the rear paper feed slot or ADF.
1
Make sure the product is done charging the ink. Open the
paper cassette cover and pull out the paper cassette until
it stops.
help button for