- ページ 6
無線アクセスポイント Cisco WAP121のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco WAP121 13 ページ。 Reboot and reset to factory default settings
Cisco WAP121 にも： レビュー (6 ページ), データシート (7 ページ), パンフレット＆スペック (4 ページ), クイック・スタート・マニュアル (13 ページ), マニュアル (4 ページ), マニュアル (4 ページ)
ページを印刷する
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Power
Off
Solid Green
Solid Amber
Flashing
Off
WLAN
Solid Green
Solid Amber
Flashing
Flashing Fast (2x
Flashing rate)
Off
LAN
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Small Business
N
OTE
Support Community at www.cisco.com/go/smallbizsupport.
6
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
Description
Power is off
Power is on. Normal operation using an
external power adaptor.
Power is on. Normal operation using PoE.
Booting/Firmware upgrade
Wireless is disabled, for both 2.4 GHz and
5 GHz wireless networks
Wireless 2.4 GHz band is enabled.
Wireless 5 GHz band is enabled.
Transmitting/Receiving Data
Wi-Fi Protected Setup (WPS) is synchronizing
No Ethernet Link
Ethernet link is active.
• FE link is detected for Cisco WAP121
• GE link is detected for Cisco WAP321
Ethernet link is active.
• FE link is detected for Cisco WAP321
Transmitting/Receiving Data