- ページ 2

会議システム Cisco 3200 SeriesのPDF データシートをオンラインで閲覧またはダウンロードできます。Cisco 3200 Series 13 ページ。 Mobile access router

Two Models Available

The Cisco 3200 Series Mobile Access Router has two models. The Cisco 3250 Mobile Access Router is a conﬁgurable

platform with a choice of hardware and software options. The Cisco 3220 Mobile Access Router is preconﬁgured

and is suitable for mass deployments in commercial transportation and public safety markets.

Hardware Overview

The Cisco 3200 Mobile Access Router combines high performance with small size. Each card of the mobile access

router is roughly the footprint of a 3.5-inch ﬂoppy disk, so it can be deployed in places where traditional networking

equipment is inappropriate. The hardware of the Cisco 3200 Mobile Access Router is specially designed for the harsh

operating environment typical of moving or stationary vehicles operating on land, in the air, or by sea.

The Cisco 3200 Mobile Access Router adheres to the PC/104-Plus electrical and mechanical standard. As a

standards-based solution, the Cisco 3200 Mobile Access Router allows for easy and cost-effective integration with

third-party PC/104-Plus products such as a hard disk drive, which would interface through industry-standard ports

on the Cisco 3200 Mobile Access Router.

Cisco 3250 Mobile Access Router

The Cisco 3250 Mobile Access Router hardware is conﬁgurable through stackable interface cards, including:

• Cisco 3251 Mobile Access Router Card (MARC)—The routing engine of the router that includes the host

processor and memory as well as one auxiliary/asynchronous port, one Fast Ethernet port, and one console port

• Cisco 3201 Serial Mobile Access Router Interface Cards (SMICs)—Provide four asynchronous and synchronous

serial interfaces on the router that connect to wired and wireless LAN and WAN communication devices

• Cisco 3201 Fast Ethernet Switch Mobile Access Router Interface Card (FESMIC) —A 4-port, 10/100 autosensing

Ethernet switch that supports 802.1q and 802.1p standards

The Cisco 3250 Mobile Access Router system comprises one MARC and various combinations of Cisco Mobile

Interface Cards (MICs). This allows ﬂexible conﬁgurations optimized for a wide range of applications and solutions.

It also allows conﬁguration changes to incorporate future applications and future wired or wireless technologies.

Cisco 3220 Mobile Access Router

The Cisco 3220 is a preconﬁgured model of the Cisco 3200 Series. It comprises a MARC with one auxiliary/

asynchronous port, one Fast Ethernet port, and one console port, a 2-port SMIC, and a 2-port FESMIC.

The SMIC and FESMIC take advantage of external wireless communication devices such as the Cisco Aironet 802.11

product family and satellite or radio devices. This ﬂexibility allows it to interoperate with most available wireless

networks, both traditional wireless services and emerging wireless technologies.

Software Overview

The Cisco 3200 Mobile Access Router uses Cisco IOS Software. This enables organizations to take advantage of the

proven power, ﬂexibility, and reliability of Cisco IOS Software for their mobile networks. IT managers can, therefore,

take advantage of their investment and training in Cisco IOS Software for their mobile networks.

Cisco Systems, Inc.

Page 2 of 13