- ページ 26

会議システム Cisco 3515 MCU24のPDF インストールとアップグレードマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3515 MCU24 44 ページ。 Cisco unified videoconferencing releases 5.6 and 5.7

Accessing the Cisco Unified Videoconferencing 3515 MCU Administrator Interface

You can use your web browser from any remote PC station to monitor and to configure the Cisco Unified

Videoconferencing 3515 MCU unit. A web server is installed in the Cisco Unified

Videoconferencing 3515 MCU unit to facilitate the use of the remote web-based monitoring and

management.

Access to the Cisco Unified Videoconferencing 3515 MCU configuration interface is controlled by a

user name and a password. Once you have entered the settings you want, you should upload them to the

unit for them to take effect, or you can save them to a configuration file to be loaded at a later time.

Before You Begin

These are the requirements for accessing the Cisco Unified Videoconferencing 3515 MCU

Administrator web interface:

A Java-compliant browser. Microsoft Internet Explorer version 5.5 or later is recommended.

•

The Cisco Unified Videoconferencing 3515 MCU unit IP address or a web link to the Cisco Unified

•

Videoconferencing 3515 MCU unit.

The required user name and password.

•

For first-time installation, you must assign an IP address to the Cisco Unified

Note

Videoconferencing 3515 MCU unit using a serial port connection before you can access the web

interface. For more information, see the

Procedure

Step 1

Launch your browser and enter the IP address or the name of the Cisco Unified

Videoconferencing 3515 MCU unit followed by /admin.

For example, http://125.221.23.44/admin or board_name/admin.

The Cisco Unified Videoconferencing 3515 MCU access window appears.

Step 2

Enter the Administrator user name and password in the appropriate fields and click Go. The default

global user name is admin. The default password is <null>.

The Cisco Unified Videoconferencing 3515 MCU Administrator interface appears.

Note

If you try to sign in as an Administrator and another Administrator is currently signed in, the

Cisco Unified Videoconferencing 3515 MCU signs you in as a Read only user. The words Read Only

appear at the top of the window and a pop-up displays the IP address of the Administrator already signed

in. Read only users cannot edit any of the Cisco Unified Videoconferencing 3515 MCU settings.

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU 24 Releases 5.6 and 5.7

2-14

Chapter 2

Setting Up Your Cisco Unified Videoconferencing 3515 MCU

"Setting the IP Address" section on page

2-5.

OL-17012-01