- ページ 2

オール・イン・ワン・プリンター Epson ET-2720のPDF スタートアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson ET-2720 2 ページ。

ページを印刷する

b. Position the top of the ink bottle along the

slot in front of the filling port, then slowly stand

the bottle up to insert it. Wait for ink to fill the

tank

Do not squeeze the bottle. Ink flows into the tank and stop

automatically when the ink tank is full.

Repeat steps 3a-3c to fill the rest of the ink tanks, close the

ink tank cover when finish.

c. Remove the ink bottle once the ink tank is full and securely

close the ink tank cap.

4. Connect the power cord to the back of the product and to an electrical outlet. Raise the con-

trol panel, then press the power button to turn on the product.

yet)

5. Press up or down arrows to select your language, date and time on the LCD screen. Next,

press the OK button. When the message "Start Here" appears on the LCD screen, press the

OK button. On the next screen, press and hold the

6. When the message to "Start Initialization" appears on the LCD screen, press the start button

to start charg-ing the ink. Ink charging takes approximately 30 min-utes. A message will appear

when ink charging is complete.

operations during ink charging or you'll waste

Go to https://epson.com/Support/Printers/All-In-Ones/ET-Series/Epson-ET-2720/s/

SPT_C11CH42201

Download your Printer Driver follow the

instructions and install it.

Connect the printer using a USB/Network Cable or

WiFi, the driver wizard will guide you in this process.

Once done, you machine is ready to be used

The technical specifications and performance capabilities listed herein are subject to change at any time and may not reflect actual production capabilities. Graphics One is

not responsible for any incorrect information contained herein and urges any buyer or potential buyer to test the product prior to making a purchase.

GOTEK

(Do not turn off or unplug the printer or perform any other

ink).

SUPPORT

(Do not connect to the computer

button for 5 seconds.

TB-15000

136-20