- ページ 12

Buttons and Hardware

The dial string can contain the following characters:

• 0 to 9

• pound (#)

• asterisk (*)

• comma (,)—This is the pause character, and gives a 2- second delay in the dialing. You can have several

The rules for dial strings are:

• Use the comma to separate the parts of the dial string.

• An authorization code must always precede a billing code in the speed-dial string.

• One comma is required between the authorization code and the billing code in the string.

• A speed-dial label is required for speed dials with authorization codes and additional digits.

Before you configure the speed dial, try to dial the digits manually at least once to ensure that the digit sequence

is correct.

Your phone does not save the authorization code, billing code, or extra digits from the speed dial in the

Note

call history. If you press Redial after connecting to a destination using speed dial, the phone prompts you

to enter any required authorization code, billing code, or additional digits manually.

Example

To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code

and billing code, consider the following requirements:

• You need to dial 9 for an outside line.

• You want to call 5556543.

• You need to input the authorization code 1234.

• You need to input the billing code 9876.

• You must wait for 4 seconds.

• After the call is connected, you must dial the extension 56789#.

In this scenario, the speed dial number is 95556543,1234,9876,,56789#.