ページを印刷する
For Hire-Stopped-Hired
The Operative Mode
The taximeter works with 3 working modes:
In any of these modes it is possible to have different functions actived by pressing one of the
5 taximeter'sbuttons:
Components needed for the sealing:
The taximeter's working modes are selectable by pressing the OP button in the following sequence:
In any of the above taximeter's working mode (FOR HIRE, HIRED, STOPPED), the other four keys K1, K2, K3, K4 will exploit a different
function, as below described.
A) Taxi in " For Hire "
When the Taxi is parked or it moves without any passenger on
board, the taxi driver selects the For Hire position by OP.
B) Taxi in "Hired "
Once the taxi starts the trip, the taxi driver selects the Hired
position by OP.
The "Taxi" roof sign will turn off and the taximeter starts the
fare calculation by distance or time.
C) Taxi in "Stopped "
At the end of the trip, the taxi driver has to select the Stopped
position by OP.
HOW TO CONVERT THE LOCAL CURRENCY AMOUNT INTO EURO AND VICE-VERSA
8
The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
* If enabled
OP - K1 - K2 - K3 - K4
IN HIRED & STOPPED MODES *
Depress and Release K3 to toggle from Local Currency to Euro and vice-versa
party is strictly prohibited.
FOR HIRE
STOPPED
FOR HIRED