- ページ 19
会議システム Cisco Cisco Access Registrar 4.2のPDF ネットワーク設定の構成をオンラインで閲覧またはダウンロードできます。Cisco Cisco Access Registrar 4.2 34 ページ。 Telepresence conference system
Cisco Cisco Access Registrar 4.2 にも： ユーザーマニュアル (44 ページ), スタートマニュアル (46 ページ)
ページを印刷する
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Step 3
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Assigning a Default Router
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
You may be prompted to enter a password.
The Network Parameters web page appears.
To set the IP address, enter an address in the StaticIP field and click Apply.
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to IP Address.
Press the Edit softkey.
Enter the new IP address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press Validat.
Press Save.
If you manually assign an IP address to the Cisco Unified IP Phone, you must
indicate the default router to be used. The default router provides connectivity to
the IP network beyond the subnet to which the phone belongs.
Before you can assign a default router, you must disable DHCP. For instructions,
see the
"Disabling DHCP" section on page
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
"Guidelines for Editing Settings in
4-15.
Configuring IP Settings
4-6.
4-19