- ページ 34

会議システム Cisco Codec C SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Codec C Series 46 ページ。 Telepresence conference system
Cisco Codec C Series にも：スタートマニュアル (41 ページ), ユーザーマニュアル (44 ページ), スタートマニュアル (35 ページ), スタートマニュアル (32 ページ), スタートマニュアル (42 ページ)

ページを印刷する

Cisco TelePresence Video Systems

Contents

The Settings menu on the Touch

controller

All settings are not available on all products; therefore the menu

items shown to the right may or may not be present on your

system.

You can find a complete description of the Touch controller

menus in the user guide for your video conference system.

The

Administrator Settings

menu is protected with the system

password.

If needed, you can set an added restriction to users' access

to the settings. This can be done on the web interface. Go

Configuration > System Configuration > User Interface

set

User Preferences

to Off. With this restriction, only

Information,

Call

Status,

Diagnostics

and

for the users.

To open the

Settings

menu, tap the system or user name in the

upper left corner and tap Settings.

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

Settings

Background

Ringtone & Sound

Bluetooth Headset

Camera Control

Main Source Selection

Display

Language

System Information

Call Status

and

Diagnostics

System

Restart

are available

Administrator

Configuration

The Settings menu

• Background: Select a background picture for your Touch controller and main video

display.

•

Ringtone &

Sound: Select a ring tone, the ring tone volume and key tone.

•

Bluetooth

Headset: Select a bluetooth headset.

•

Camera

Control: Set the camera parameters.

•

Main Source

Selection: Select the main input source, e.g. camera control.

• Display: Select brightness, color temperature and DVI mode for the main video display.

• Language: Select the language for the user interface.

•

System

Information: See an overview of the system configurations.

•

Call

Status: See an overview of the call parameters when in call, e.g. protocols,

transmit and receive rates, packet loss.

• Diagnostics: Set additional system logging on.

• Restart: Select this option to restart the system.

• Administrator: See below.

The Administrator Settings menu

Back

| Administrator Sett

•

Date, Time &

Date, Time & Location

•

Call

Call Details

• Provisioning: Start the provisioning wizard.

Provisioning

•

Multipoint

Multipoint Mode

•

IP &

Pairing

connected via LAN there are separate entries for the codec and the Touch.

•

Network Status -

IP & VLAN

Network Status

•

Network Status -

• SIP: Configure the SIP settings.

SIP

• H323: Configure the H.323 settings.

H323

•

EMC

EMC Resilience

ience to electromagnetic noise present.

Reset

• Reset: Select this option for a complete factory reset. All your settings

are reset.

Appendices

Location: Configure date and time settings.

Details: Configure the default bit rate and auto answer settings.

Mode: Insert the address of the Multiway server.

VLAN: Configure the IP and VLAN settings. If the Touch controller is

Codec: Current network status for the codec.

Touch: Current network status for the Touch controller.

Resilience: Select this option to change the Touch controller's resil-

Getting Started Guide

Contacts