オール・イン・ワン・プリンター Epson ET-7700のPDF ここからスタートをオンラインで閲覧またはダウンロードできます。Epson ET-7700 4 ページ。
Epson ET-7700 にも： クイックマニュアル (17 ページ)
ページを印刷する
ET-7700
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
obtener instrucciones de configuración en español, consulte la Guía
de instalación en www.epson.com/support/et7700sp (requiere una
conexión a Internet).
1
Unpack
Note:
• Do not open the ink bottles until you are ready to fill the ink tanks.
The ink bottles are vacuum packed to maintain reliability.
• The CD/DVD tray is taped to the bottom of cassette 2.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Fill ink tanks
Note:
This product requires careful handling of ink. If ink spills, wipe it
off immediately with a damp towel to avoid permanent stains. If ink gets
on your clothes or belongings, it may not come off.
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Para
1
Open the ink tank cover, then open the cap for the ink tank
you are going to fill.
2
Unpack one of the ink bottles. Hold the ink bottle upright
and slowly turn the bottle cap to remove it.
Caution:
the top of the ink bottle after its cap is removed; otherwise, ink
may leak.
3
Position the top of the ink bottle along the slot in front of
the filling port, then slowly stand the bottle up to insert it.
Note:
the color of each tank. Do not force the bottles into position; they
are keyed for each color.
4
Wait for the ink to fill the tank. Do not squeeze the bottle.
Ink flows into the tank and stops automatically when the
ink is filled to the upper line.
Note:
bottle.
Do not shake or squeeze the ink bottle. Do not touch
Refer to the color-coded sticker on the ink unit to identify
If ink does not flow from the bottle, lift and reinsert the