ページを印刷するREMOTE CONTROL UNIT
DISPLAY
Information is displayed when the remote controller is switched on.
If switched off, only the operating mode, the room temperature and
the clock are shown
Operation mode
Automatic
Cooling
Heating
Dehumidification
Fan
Night
Oscillation
mode
Flap
MODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
(cooling)
The air conditioner makes the room cooler.
(dry)
The air conditioner reduces the humidity in
the room.
(automatic)
When this setting is selected, the air
conditioner calculates the dif ference
between the thermostat setting and the
perceived room temperature and
automatically switches to the "cool" or
"heat" mode.
(fan)
The air conditioner works only as a
circulation fan.
TEMPERATURE SETTING BUTTONS
- (cooler)
Press this button to decrease the set
temperature.
+ (warmer)
Press this button to increase the set
temperature.
"FAN " BUTTON (fan speed)
Fan speed is automatically
selected by the microcomputer.
High speed.
Medium speed.
Low speed.
NIGHT/ECO BUTTON
Press this button in order to select the
NIGHT/ECO mode.
"HIGH POWER" BUTTON
Press this button in order to select the HIGH
POWER mode.
CLOK AND TIMER SETTING BUTTON
Press this button in order to:
• set the clock
• set the ON/OFF timer
For details refer to paragraphs "SETTING
THE HOUR" and "SETTING THE TIMER".
C
Fan speed
HIGH POWER
mode
Automatic
High speed
SENSOR
A
temperature
sensor inside the
remote control unit
detects the room
temperature.
HOURS AND MINUTES SETTING
BUTTONS
With these buttons is possible to set the
clock and the timer. For details refer to
paragraphs " SETTING THE HOUR" and
"SETTING THE TIMER".
I FEEL mode is active
(remote controller
sensor active)
Functions menu
Displayed when
transmitting data
Inverter model
Timer modes
Clock
Medium speed
Low speed
TRANSMITTER
When you press the
buttons of the remote
control unit, the
mark
appears
on the display to
transmit the setting
changes
to the
receiver in the air
conditioner.
C
5
Room
temperature
Set point
temperature
MODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
(heating)
The air conditioner makes the room warmer.
Fixed symbol: the fan stops when the set
temperature is exceeded.
Blinking
symbol
RECIRCULATION FUNCTION): the fan
keeps running even after the set
temperature is exceeded.
(automatic)
When this setting is selected, the air
conditioner calculates the dif ference
between the thermostat setting and the
perceived
room temperature and
automatically switches to the "cool" or "heat"
mode.
ON/OFF BUTTON
This button turns the air conditioner ON
and OFF.
FLAP BUTTON
Press this button in order to select the
desired function.
Fixed: six position
Continous oscillations
Automatically oscillations
IFEEL/IFEEL C SENSOR SELECTOR
Press this button to modify the active setting
for room temperature detection (from remote
controller to air conditioner and viceversa).
MENU BUTTON
Use this button in order to enter the functions
menu.
TIMER SELECTION BUTTON
Press this button to select the type of timer
to activate. For details refer to paragraph
"SETTING THE TIMER".
EG
(HEATING