- ページ 15
マトリックススイッチャー Cable Electronics CE Labs SW808HDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cable Electronics CE Labs SW808HD 17 ページ。 High definition matrix switch
ページを印刷するMATRIX APPLICATION SOFTWARE
Software Introduction
The (AV Matrix) Matrix control software is used to remotely configure
one or more of the SW404HD or SW808HD matrix switches.
Software Description
The AV Matrix testing software application tool is used for matrix
testing and application.
The following is the required PC operation environment.
• Window98/2000/NT/XP operating systems
• 32M or greater internal memory
• 10M or greater hard disk space
• CD-ROM
• At least one serial communication port.
Software Activation
1. Turn off power both to the matrix and to the computer.
2. Connect the matrix RS-232 port to the PC RS-232 port using the
bundled communication cable. (Refer to Matrix and Control
Computer Connection).
3. Turn on power to the matrix and the computer.
4. Insert the CD ROM provided and install AV Matrix.msi.
5. Click on the AV Matrix program under the start menu.
6. Click on the Scan button to connect to the matrix switch.
Software Features
The software controls signal connection between the corresponding
input port and output port as required. The main operation window is
shown below:
Main Operation Interface Functions
Refer to the window menu (next page). The blue interface area
shows the cross connect matrix of output ports 01-08 and input ports
01-08. On the lower right hand corner, select either Video for signal
input switching or Disconnect all to close all output ports. Click to
check the white box to the left of Video or Audio for video or audio
signal transmission.
Front Panel Key Functions
P
a
t r
F
u
n
t c
o i
n
K
e
y
ALL
4
OFF
5
STO
6
(Store Key)
RCL
(
Retrieve Key
7
AUDIO
8
9
VIDEO
F
u
n
t c
o i
n
Implement all output selection keys via
certain input route.
Example: First press the ALL key, then
select the input channel to output to all
output channels; first press the ALL key,
then press the OFF key to close all the
presently displayed switching status.
Close output channel key.
Example: First press the output channel
button to close, then press the OFF
channel.
Saves all current input/output
corresponding relations.
Example: Press the STO key, thenpress
the desired output channel key to save
all currently displayed input/output
corresponding relations.
The RCL key retrieves the saved
input/output corresponding relations.
Example: First press the RCL key, then
press the previously saved output channel
key to retrieve the saved input/output
status and implement this status switching.
Enables or disables audio switching
selections.
Example: Press the Audio key to open or
close the Audio switching function. When
the LED indicator next to the Audio key is
on it indicates audio switching is enabled,
when off the function is disabled.
Enables or disables video switching
selections.
Example 1: Press the Video key to open or
close the video switching function. When
the LED indicator next to the Video key is
on it indicates video switching is enabled,
when off the function is disabled.