- ページ 29

テレビ Sony AZ1-HのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sony AZ1-H 34 ページ。 Lcd digital color tv

Sony AZ1-H サービスマニュアル
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to "White Balance Adjustments".

2-3. WHITE BALANCE ADJUSTMENTS

White Balance adjustment data is located on the Digital Service Menu.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
NOTE: If the Digital Service Menu is not displayed, press
JUMP or OPTIONS .
3
Press
to move to "006 WB" Category.
2
DIGITAL
006 WB
000 WHITE_BALANCE ___
4. Press
to enter White Balance Adjustment mode.
0
KDL-40NX700/46NX700
5
+
POWER
Volume
SERVICE
SERVICE ADJUSTMENTS
5. To select the White Balance Adjustment setting that needs to
be changed, do the following:
a. To select R_DRV, press
b. To select G_DRV, press
c. To select B_DRV, press
d. To select R_BKG, press
e
To select G_BKG, press
f.
To select B_BKG, press
6. After selecting the White Balance setting, press ENT to
display the edit screen.
The screen displays a "Please input WB items" message.
DIGITAL
WB
*1 R_DRV 128
2 G_DRV 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
Please input WB items
(0 - 255)
---
7.
Using the numbers buttons on the remote, enter the Data
Value for the White Balance setting (value must be between
1 and 255).
8. Press ENT to WRITE (save) the changes.
9. To exit White Balance Adjustment, press JUMP or OPTIONS
1
.
2
.
3
.
4
.
5
.
6
.
SERVICE
Gain
0: x 0.5, 128: x 1, 255: x1.5
Offset
128: offset 0
24