- ページ 4

テレビ Sony BRAVIA KD-65XE7096のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony BRAVIA KD-65XE7096 44 ページ。
Sony BRAVIA KD-65XE7096 にも：取扱説明書 (44 ページ)

ページを印刷する

• Install the TV so that the TV's Table-Top Stand does not

protrudes out from the TV stand (not supplied). If the Table-Top

Stand protrudes out from the TV stand, it may cause TV set to

topple over, fall down, and cause personal injury or damage to

the TV.

• Only qualified service personnel should carry out wall-mount

installations.

• For safety reasons, it is strongly recommended that you use

Sony accessories, including:

Wall-Mount Bracket: SU-WL450

• Be sure to use the screws supplied with the Wall-Mount Bracket

when attaching the Wall-Mount Bracket to the TV set. The

supplied screws are designed as indicated by illustration when

measured from the attaching surface of the Wall-Mount Bracket.

The diameter and length of the screws differ depending on the

Wall-Mount Bracket model.

Use of screws other than those supplied may result in internal

damage to the TV set or cause it to fall, etc.

8 mm - 12 mm

Transporting

• Before transporting the TV set, disconnect all cables.

• Two or three people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as shown below.

Do not put stress on the LCD panel and the frame around the

screen.

• When lifting or moving the TV set, hold it firmly from the

bottom.

• When transporting the TV set, do not subject it to jolts or

excessive vibration.

• When transporting the TV set for repairs or when moving, pack

it using the original carton and packing material.

Screw (M6)

Wall-Mount Bracket

TV's rear cover

Topple prevention

KD-65XE70xx

8 mm - 12 mm

M6 screw

(previously removed)

Cord

(not supplied)

Except KD-65XE70xx

8 mm - 12 mm

Cord

(not supplied)

1.5 N·m/1,5 N·m

{15 kgf·cm}

Screw

(not supplied)

M6 screw

(not supplied)

1.5 N·m/1,5 N·m

{15 kgf·cm}

Screw

(not supplied)