- ページ 4
ターンテーブル Cable Electronics AIO7のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cable Electronics AIO7 4 ページ。 All-in-one
ページを印刷するAutomatic Power On Time Setting
In the menu of CLOCK SETTING, press
to select POWER ON TIME, then press ENTER
to confirm. Press
or
to select ON, then
enable this function. Press ENTER to confirm.
Press
or
to select the hour and minute of
Auto-Power-On, press
or
to set them, press
ENTER to confirm.
PHOTO SETUP
Display Mode
Press MENU to enter the main menu, press
move the cursor to the PHOTO, press ENTER to
↑
↓
enter the PHOTO, press
or
to select
DISPLAY MODE, press ENTER to list the
↑
↓
selection. Press
or
to select the display
mode: FIT TO SCREEN or FULL SCREEN, press
ENTER to confirm
Slide Show Interval
Adjusted the same way as Display Mode. Used
to set the interval time between two photos.
Transition Mode
Used to control the transition performance
between two photos.
ADDITIONAL SETTINGS
Sensor Time
Press MENU to enter the main menu, press
move cursor to MORE SETTING. Press ENTER to list
↑
↓
the time to set, then press
or
to select time to
play after motion sensor active, select OFF to disable
the motion sensor.
↑
↓
or
↓
to
↓
to
Files Source
Move cursor to the FILES SOURCE, press ENTER
to set the files source to play. Three sources can
be selected in SD, flash memory and USB drive.
Button Count
Move the cursor to BUTTON COUNT, press
ENTER to display the options: ON and OFF.
Select ON to enable the button counting record,
and OFF to disable it.
After enabling this function, a text file named "Button_Count.txt" is generated in the
SD card or USB drive. It will record the counting times of each button pressed. The
maximum times is 99999.
Volume
↑
↓
The buttons
or
can be used to adjust the volume while the video is playing.
Requirements of File Storage
1. The default video files in the root folder.
2. Folders named 1, 2, 3... used to store files corresponding to the push buttons.
For example, if you want a video to be played after the button 1 is pressed, please
place the video file in the folder named 1.
3. the folder named 5 is used to store the files when motion is active.
Content Update
Use USB drive to update content. Please keep in mind not to enter the setup menu, or
it will not work.
1. Copy the files to the USB drive, refer to item 5, the requirement of file storage.
2. Make a TXT format file named "USB2SD.txt," the content can be blank. Make sure
the SD card is not write-protected.
3. Insert the USB to the USB port of ad player, then it will start to update the content.