- ページ 13

会議システム Cisco SX seriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco SX series 33 ページ。 Telepresence video systems
Cisco SX series にも: スタートマニュアル (34 ページ), スタートマニュアル (46 ページ)

Cisco SX series スタートマニュアル
Cisco TelePresence Video Systems
Introduction

Web interface

You have to use the Touch controller or the remote control for
the configurations, until you know your system's IP address.
The configurations described in this chapter can also be found
on the Touch controller under Administrator settings. You must
enter the administrator passphrase to access that page.
Find the IP address
If you have a Touch controller, tap the gearwheel in the upper
left corner and tap Settings. You can find the IPv4 address and/
or IPv6 address in the
System Information
If you have a TRC6 remote control, navigate to the upper left
corner on the home screen and further to
Sign in to the web interface
1. Open a web browser and enter the system's IP address in
the address bar.
2. Enter your user name and passphrase and click
The default user name is
admin
with no passphrase set.
If you are not able to connect to the system:
• Make sure the system and computer are connected to the
same network.
• Make sure the system is switched on.
If the system has just been switched on, wait a few minutes to
allow the system to start up.
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
User interfaces
Web interface
Web interface
section.
System
Information.
Sign
In.
On-screen setup assistant
13
Getting Started Guide
Touch
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.