- ページ 7

ケーブルとコネクター cable matters 103080のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。cable matters 103080 8 ページ。 1x2 audio/video splitter

3.5 Connection Instructions

1) Power down all the source equipment and output displays

2) Connect an HDMI cable from the video source (TV) to the VIDEO IN

3) Connect HDMI cables from the Splitter to both displays

4) Set the EDID switch to HD if using 1080p as a video resolution

5) Set the EDID switch to 4K if connecting 4K displays or another video

resolution other than 1080.

6) Connect the AC power adapter to the Splitter and to a power outlet

7) Power on the video source and output display equipment

8) Select the HDMI audio and video output from the video source

9) Select the HDMI audio and video input from the connected displays

Power off everything before changing any equipment or EDID settings



Verify that the Splitter and all connected equipment have power. The



LEDs should be lit on the Splitter

Verify that all cables are connected to the correct input and output ports



Verify that the correct video input and outputs are selected



Test with the 4K EDID setting to allow the Splitter to discover the best



compatible resolution

4K video requires a 4K source, 4K cables and 4K equipped displays



Adjust the aspect ration and refresh rate of the video source to find test



compatibility with the output displays

Test the cables by directly connecting the video source to the displays



Connected displays can only be mirrored, not extended



A 'Not Supported' error message may indicate that the video source



cannot support two HDCP connections

Contact [email protected] with questions

www.cablematters.com

1x2 Audio/Video Splitter