- ページ 5

スイッチ cable matters 201063のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。cable matters 201063 12 ページ。 Usb-c 3.1 gen 2 multiport hub / usb-a 3.1 gen 2 multiport hub / usb, uhs-ii sd card reader & sata 3.0

ページを印刷する

Connec�ng the Mulitport Hub to the Host

1) Directly connect the Hub to a USB-C/Thunderbolt 3 or USB-A port of

the computer

2) Connect the AC power adapter BEFORE connec�ng any devices to the

Hub (AC power is op�onal)

3) Check that the blue LED on the top of the Hub is lit

Notes:

• The AC power is op�onal. It may be required with external hard drives.

• DO NOT disconnect the AC power while transferring ﬁles

• A PC with Thunderbolt 3 may need to update Thunderbolt 3 drivers

(For more informa�on go to kb.cablema�ers.com)

1) Connect a USB-C peripheral device (sold separately)

2) Wait while any needed device drivers are downloaded

3) Transfer ﬁles to an external hard drive

Notes:

• Connect the AC power before transferring ﬁles, if needed

• USB-C port is limited to 5V/1.5A charging (with AC power)

• Not compa�ble with USB-C video adapters or Thunderbolt 3 devices

• Data transfer speed up to USB 3.1 Gen 2 (10Gbps)

1) Connect a USB-A peripheral device

(cables sold separately)

2) Wait while any needed device drivers are downloaded

3) Use Safely Remove or Eject to remove data devices before unplugging

Notes:

• Connect the AC power before transferring ﬁles, if needed

•

AC power may be required for the Hub to recognize an external hard drive

• USB-A port is limited to 5V/1.5A charging (with AC power)

• Data transfer speed up to 10Gbps is limited by the connected USB cable

and device

USB-C Downstream Port

USB-A Downstream Port