- ページ 14

会議システム Cisco TelePresence SpeakerTrack 60のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence SpeakerTrack 60 19 ページ。 Telepresence
Cisco TelePresence SpeakerTrack 60 にも：データシート (3 ページ), インストレーション・マニュアル (14 ページ), マニュアル (22 ページ), カメラマニュアル (40 ページ), カメラマニュアル (44 ページ)

Connecting the camera cables

It can be a bit cramped when you connect and secure the cameras, so you'll probably

want to inspect the camera connector panel to know where the HDMI, Ethernet and power are

located.

Connect one HDMI cable

to each camera. The HDMI

cables for the two cameras

are going to the codec.

Start with the camera to the right and hold the camera as illustrated. Make sure the short cables

(Ethernet and power) are available for this camera and connect the cables. Then connect the

HDMI cable coming from the codec. Guide the camera into position.

Proceed with the camera to the left and hold the camera the same way as you did with the first

camera. Connect the long cables (Ethernet and power) to the left camera. Connect the HDMI

cable coming from the codec. Guide the camera into position.

Left

side

78-100223-02C0 | MARCH 2015.

The Ethernet and power

cables are coming from the

base unit. The short cables

goes to the right camera and

the longer cables to the left

camera.

3,0A

Right

side