- ページ 12

会議システム Cisco TelePresence SX10のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence SX10 45 ページ。 In-room control on touch 10
Cisco TelePresence SX10 にも： インストレーション・マニュアル (8 ページ), ユーザーマニュアル (26 ページ), クイックマニュアル (2 ページ), ユーザーマニュアル (34 ページ), ユーザーマニュアル (29 ページ), 予備ユーザーマニュアル (9 ページ), ユーザーマニュアル (38 ページ), インストレーション・マニュアル (8 ページ), ユーザーマニュアル (2 ページ), ユーザーマニュアル (37 ページ), マニュアル (45 ページ), インストレーション・マニュアル (2 ページ), ユーザーマニュアル (34 ページ), ユーザーマニュアル (5 ページ), ユーザーマニュアル (38 ページ), ユーザーマニュアル (38 ページ), スタートマニュアル (46 ページ), クイックマニュアル (2 ページ)

ページを印刷する
Cisco TelePresence SX10 マニュアル
Apply In-room Control panel to the video system
Table of contents
(Not available when using the offline editor. Instead, you should
export the in-room control panel to a file in order to save your work
for later.)
Introduction
Apply the in-room control panel to the video system. You will see the
results immediately on the Touch 10.
Create a user interface
Create a user interface
• Choose
API for in-room control
Check the result on Touch 10
(Not available when using the offline editor.)
Widgets
Tap the in-room control icon in the Touch 10 status bar to open the
in-room control panel.
Command reference
Troubleshooting
Tips and tricks
Examples
In-Room Control on Touch 10
for Cisco TelePresence
Example of two sets of in-room control panels. The Global has been
MX200 G2, MX300 G2,
selected (blue light bulb) and a panel consisting of three panes is shown.
MX700, MX800,
To the right of the Share button, a in-room control Homescreen entry icon
SX10, SX20, SX80
has been added.
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
Which in-room control icons (entry icons) used is defined by the
Panel icon
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
Export > To codec
setting, as shown on the previous page.
Export the In-room Control panel to file
You may also export the in-room control panel to a file. This file can
be imported back into the editor at a later stage. Note that you will
export all your work (Global, Homescreen and In-Call panels)
• Choose
Export > To file
If you are using the offline editor, this is the only way you can save
your work for later.
Exporting to file may also be useful as a way of creating a design
template if you are going to push the same in-room control panel to
multiple video systems.
Files exported while connected to a video system are in the same
format as files exported from an offline editor. This means that any
of these files can be imported into an editor launched from a video
system's web interface, and then pushed to the video system's
Touch 10.
Remove a panel from Touch 10
To remove a panel from the Touch 10, remove it from the editor and
then push your editor configuration to the video system. The panel's
icon should disappear instantly.
12