- ページ 33

会議システム Cisco TelePresence SX20のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence SX20 38 ページ。 In-room control on touch 10
Cisco TelePresence SX20 にも: クイックセット (8 ページ), スタートマニュアル (41 ページ), スタートマニュアル (42 ページ), クイック・リファレンス・マニュアル (2 ページ), クイックセット (2 ページ), クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアル (34 ページ), ユーザーマニュアル (29 ページ), トラブルシューティングマニュアル (37 ページ), 規制遵守と安全情報マニュアル (9 ページ), セットアップマニュアル (8 ページ), インストレーション・マニュアル (2 ページ), ユーザーマニュアル (2 ページ), クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアル (37 ページ), マニュアル (45 ページ), マニュアル (45 ページ), 設置シート (2 ページ), インストレーション・マニュアル (2 ページ), ユーザーマニュアル (34 ページ), ユーザーマニュアル (5 ページ), ユーザーマニュアル (38 ページ), ユーザーマニュアル (38 ページ), スタートマニュアル (42 ページ), リファレンス・マニュアル (8 ページ), スタートマニュアル (46 ページ)

Cisco TelePresence SX20 ユーザーマニュアル
Camera Control

View Camera Settings (Local camera)

1
In a call or outside a call (as shown here), move cursor up to
the upper right corner to the Camera icon. Press OK on the
remote control.
3
You may now make the adjust the pan, zoom and tilt of the
camera. Use the Increase/Decrease controls of the remote
control to adjust the zoom and the Cursor keys to adjust pan
and tilt.
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
2
The camera icon will now appear. Press OK again on the remote
control.
4
You may also make the self-view image sticky (always shown) and/
or maximize it by selecting the icons in the upper right corner of this
menu.
Press Back on the remote control to exit the menu.

About Camera Settings

The camera settings let you control
the zoom, pan and tilt of your own
camera.
The self-view (the image that the
others see from your system) can
be turned on and off as well as be
shown minimized or maximized (full
screen).
You may want the self-view to be
always shown, this is called to make
it sticky.
33