- ページ 13

ビデオカメラ Sony BRC-X401のPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Sony BRC-X401 15 ページ。 Srt introduction
Sony BRC-X401 にも：マニュアル (15 ページ), コマンドリスト (41 ページ)

Technical Guide | BRC-X400/SRG-X400/X120

Troubleshooting

This section describes how to manage the problems might happen for SRT function of the cameras.

 Unable to connect

[Case 1] Check the network connection.

[Case 2] Check the Caller/Listener mode. If camera is Caller, set destination as Listener. If

Camera is Listener, set destination as Caller.

[Case 3] Check the setting of destination's passphrase setting. It must be same as camera' setting.

[Case 4] Video setting such as size might not be supported by destination's device. Change video

setting of Camera to which the device of the destination supports.

 Image is distorted or interrupted

[Case 1] Network might be unstable. Try more stable line such as wired.

[Case 2] [Latency] setting might be out of the recommendation of SRT Alliance. Please refer to

the information announced from SRT Alliance, for the recommended setting value.

https://www.srtalliance.org/srt-deployment-guide/

 Repeat cycle of poor and good image quality

ARC is working by detecting unstable network. Please try followings:

Connect to stable network

Connect to faster network

Open [Video Codec] tab in [Video] and select lower bitrate at [Bitrate 1]

Uncheck ARC

Sony

SRT introduction

Version 1.0