- ページ 14
ウェザーステーション DigiTech XC0438のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DigiTech XC0438 16 ページ。 Smart wi-fi weather station lcd colour display
TREND INDICATOR
The trend indicator shows the temperature or humidity trends
of changes based on the next 15 minutes .
MAX / MIN DATA RECORD
The console can record MAX / MIN
readings both daily and since last
the reset .
TO VIEW MAX / MIN
1 . In normal mode, press the [ MAX / MIN ] key on the front side, to check the daily MAX records
of the current channel and indoor .
2 . Press [ MAX / MIN ] key again to check the daily MIN records of current channel and indoor .
3 . Press [ MAX / MIN ] key again to check the accumulative MAX records .
4 . Press [ MAX / MIN ] key again to check the accumulative MIN records.
5 . Press [ MAX / MIN ] key again and back to normal mode .
6 . User can also check records of different sensors by pressing the [ CHANNEL ] key .
TO RESET THE MAX/MIN RECORDS
Press and hold the [ MAX / MIN ] key for 2 seconds to reset the current on display MAX or MIN
records .
NOTE:
The LCD will also display the "
CALIBRATION
To calibrate the temperature and humidity:
1 . In normal mode, press and hold the [
as below .
2 . Press [ + ] or [ - ] key to select IN or any channel .
3 . Press [ MODE / ALARM ] key to select between: Temperature
4 . While temperature or humidity is blinking, press [ + ] or [ - ] key to adjust the offset value.
5 . When finished, press [ MODE / ALARM ] to proceed with the next calibration by repeating
process 2 - 4 above.
6 . Press [
/ CAL ] key to return to normal mode .
BACK LIGHT
The main unit back light can be adjusted, using the [ HI / LO ] sliding switch to select the
appropriate brightness:
- Slide to the [ HI ] position for the brighter back light .
- Slide to the [ LO ] position for the dimmer back light .
Daily MAX
Daily MIN
reading
reading
" / "
"icon, when showing the records.
/ CAL ] key for 2 seconds to enter the calibration mode
14
Rising
Steady
MAX reading
MIN reading
since last
since last
reset
reset
Humidity .
Falling