- ページ 15
ビデオカメラ Sony DCR-SR21のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Sony DCR-SR21 17 ページ。 Digital video camera recorder
ページを印刷する
Assembly-1: Installation Cautions of the DC-IN Harness
DC-IN harness
Cabinet (G(246))
Assy
Pass DC-IN harness in the three libs.
Libs
Lib
DC-IN Harness
Assembly-2: Installation Cautions of Speaker Harness
Pass speaker harness in the two libs.
Libs
Speaker
Harness
DCR-SR21/SR21E/SX21/SX21E_L2
Assembly-3: How to distinguish the side of Optical Filter Block
facing to Lens Device
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing IR cut coated side to the lens
device. Distinguish IR cut coated side from other by applying the
fluorescent light to the Optical Filter Block in dark place
(cut off outside light).
Optical Filter Block
Hold it with tweezers or the like.
[IR Cut Coated Side]
[The Other Side]
Lens Device side
• The other surface
the red coating is
not reflected.
• Side view
the red belt
is seen.
• IR cut coating surface
the red coating is reflected.
Lens Device side
Assembly-4: Precaution Mounting method of Diode (D1003) (LED
video light)
12.7mm
Diode (NSPL500DS)
5.7mm
Bend
Cut
Precaution the polarity.
Anode
Kathode
Diode (NSPL500DS)
VC-611 Board
3. ASSEMBLY
Assembly-5: Installation Cautions of Mic Unit
Microphone holder
Route the flexible board
as shown in the figure (image).
Pass the flexible board of
the mic unit under this lib.
Assembly-6: The Method of attachment of FP-1479 Flexible
Board
1 Fold dotted line parts of the FP-1479 flexible board
as shown in figure.
Adhesive tape
FP-1479 Flexible Board
Valley fold
Adhesive tape
Mountain fold
Marks
Marks
Unite corners.
3-1
2 Put FP-1479 Flexible Board on the Hinge Assy
as shown in figure.
Adhesive Part
3 Insert the flexible board in the claw of
the hinge assy as shown in figure.
Valley fold
Mountain fold
Adhesive
tape
Claw
4 Roll the FP-1479 flexible board 2 times in
the hinge assy as shown in figure.
Mountain
fold
Valley fold
Hinge Assy
2 times