- ページ 4

会議システム Cisco TelePresence Touch 10のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence Touch 10 6 ページ。 Ce 9.3, systems
Cisco TelePresence Touch 10 にも：インストレーション・マニュアル (12 ページ), ユーザーマニュアル (45 ページ), インストレーション・マニュアル (2 ページ)

Direct pairing

Connect Touch 10

Connect the Touch 10 to the network socket on the codec or endpoint.

Option C: Note that the SX Series do not provide Power over Ethernet (PoE), so you need

a mid-span PoE injector to power Touch 10.

Option D: The MX Series (MX200G2, MX300G2, MX700, MX800) provides Power over

Ethernet (PoE).

Touch 10 set-up

Once Touch 10 is connected to power, the set-up procedure begins. Follow the

instructions on screen.

If Touch 10 needs software upgrade, new software will be downloaded from the codec

and installed on the unit automatically as part of the set-up procedure. Touch 10 restarts

after the upgrade.

You can verify that Touch 10 is successfully connected to the codec by checking that the

codec address is displayed in the top banner.

PoE rated

Ethernet cable

PoE rated

Ethernet cable

The endpoint

(MX Series)

Standard

The codec

(SX80)