- ページ 6

会議システム Cisco TelePresence VX Clinical AssistantのPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence VX Clinical Assistant 33 ページ。 Mobile video system

ページを印刷する

Important Safeguards

Using System in a Medical Environment

No currently available technology can completely

substitute for the in-person physical examination of an

individual patient. Cisco Telepresence products have

the ability to provide high quality audio/high resolution

video over long distances; and when used properly,

these products can provide tools for physicians and

other medical professionals who are unable to examine

a patient in person. The use and value of the system

will vary depending on the specific circumstances of

the patient's condition, transmission speed and the

ability of audio/visual technology to be used for remote

evaluations. Ultimately, judgments on how this tool

should be used must be at the individual discretion of

the physician or other medical personnel supervising

the patient's care.

All the equipment connected to this system shall be

certified according to UL Standard UL60601-1 or other

IEC/ISO/CSA Standards applicable to the equipment.

When this system is used

together with other

equipment in the patient

area*, the equipment shall

be either powered by an

isolation transformer or

connected to the power

outlet that is at the rear of

[ PATIENT AREA ]

the cart, unless it is

certified according to UL Standard UL60601-1.

NOTE: The power outlet provided in the system is

powered from an isolation transformer. The maximum

output rating of this outlet is 150 Watts.

141299.21 Cisco TelePresence VX Clinical Assistant

CAUTION:

The leakage current could increase when connected to

other equipment.

The operator should take precautions to avoid touching

the rear panel input and output circuitry and the patient

at the same time.

To isolate the system from the mains supply remove

the mains plug from the wall socket.

Warning on Power Connection

Use only with the supplied power cords or cords that

meet local hospital-grade requirements. Users in the

United States and Canada should use hospital-grade

cords that meet the following requirements:

United States

Plug Type

Hospital Grade

Cord Type

SJT3 x 18 AWG

Minimum Cord

Det Rating

Saftey Approval

CSA NRTLus

NEVER USE AN EXTENSION CABLE TO POWER THE

SYSTEM.

Canada

Hospital Grade

SJT3 x 18 AWG

10A/125V

CSA

Wireless Access Point Compliance

Any customer-supplied Wireless Access Point used

with the VX Clinical Assistant must comply with

appropriate regulations in the country of use.

ElectroStatic Discharge (ESD)

When subjected to an electrostatic discharge the

12x system camera image may suffer momentary

interruption - this will self-recover in a few seconds

after the discharge.

To avoid excess electrostatic discharge, floors

should be wood, concrete or ceramic tile. If floors are

covered with synthetic material, the relative humidity

should be at least 30%

Battery Maintenance

To insure maximum longevity of the battery, the VX

Clinical Assistant should periodically be operated on

battery power until the "Low Battery " warning comes

on. Once the warning sounds the system should be

reconnected to an AC power source until the battery is

fully charged.