- ページ 8

エアコン Argo POLIFEMO CLASS WhiteのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Argo POLIFEMO CLASS White 11 ページ。 Evaporative air cooler

TIMING BUTTON

a. After turning on, the timer indicator is turned off by default and the digital tube displays ambient temperature; when the

button is first pressed, the timer sets to 30 minutes; the time increases by 30 minutes when the button is pressed every

time, and the timer can be set up to 8 hours; if the button is pressed again, the digital tube displays 00, and the timer

turns off; press the button again to repeat the cycle;

b. After setting the time, the digital tube displays the ambient temperature, and "C "indicator turns on. During the last 30

minutes, the digital tube displays remaining time and enters standby state after reaching specified time.

Water pump protection

When the software detects water shortage for few seconds, the cooling function stops working, the ventilation function

keeps going on and the buzzer sends bibi alarm sound.

Press the Cooling/Humidify button for three times within three seconds after power on. Take out the tank and fill it as

described in the section "Filling the water tank".

Water tank extraction protection

When the water tank is extracted, the machine power is cut off and the buzzer sends BiBi sound and it stops working.

When the water tank is put back, the buzzer sends BiBi sound, and the power enters standby mode.

Smart memory for unexpected power outage

When the power is restored after unexpected power outage, the appliance sends "bi" sound; after 30 seconds, it resumes

the previous state and all functions are restored.

Auto power-off function

If the device has been running for 15 hours continuously in default state after power on and there is no operation, it

automatically turns off. If you want to cancel this function, press and hold the Cooling and the Mode button for 3 seconds

simultaneously; the buzzer sends Bi sound and cancels auto power-off function; press and hold the two buttons again, the

buzzer sends Bi sound and resumes auto power-off function.

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)

Open the battery cover on the back of the remote control (press and pull the cover).

Place the battery inside the cover, making sure the polarity is correct.

Slot the cover back into position on the remote control.

Use Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/EC (supplied

with the remote control).

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE

2006/66/EC

Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not be disposed of

together with unsorted waste. It must be must be delivered to appropriate separated waste disposal plants or to dealers that

provide a similar service. Separate waste disposal of batteries prevents potential negative effects on the environment and human

health resulting from inadequate disposal, and also allows the materials from which it is made to be recovered and recycled in

order to achieve significant savings in terms of energy and resources. The separate disposal obligation is underlined by the

crossed-out dustbin symbol appearing on the battery. Illegal disposal of the product by the user shall result in the application of

administrative sanctions as defined by current regulations.

V 12/16

PROTECTION FUNCTIONS