- ページ 5

ラジオ DIGITECH Audio S450のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DIGITECH Audio S450 17 ページ。 World band radio. am/fm/shortwave field radio with lcd backlight display and signal strength indicator

ページを印刷する

USING AC POWER

Plug AC adapter into the socket on the left side of the radio. Use

only the AC adapter supplied. When the AC adapter is plugged in,

the full power level will show in the upper left corner of the display,

looking like a full battery. If you lose the AC adapter that came with

the radio, use one with 9 Volt DC output, negative polarity, 500

milliampere and a plug with 5.5 millimeter outer diameter, 2.1

millimeter inner diameter.

POWERING FROM A CAR OR BOAT

Use a DC to DC converter. Output: 9 Volt DC, negative polarity, outer

diameter 5.5 millimeter; inner diameter 2.1 millimeter.

TURNING ON AND OFF / SETTING AND

DEACTIVATING THE SLEEP TIMER

Turn on the radio by pressing the red POWER & SLEEP button on the

front top right corner of the radio. When it turns on you will brieﬂy

see a sleep timer symbol in the bottom portion of the display, this

is the sleep time and the radio will play for this amount of minutes

and then shut o . It can be deactivated by continuously pressing the

power button until 'on' appears in the bottom of the display; with

each press you will see the numbers going down from 90 to 60 to

45 to 30 to 15 to 10 to 5 to 1 minute and then to 'on'. When 'on'

appears, stop pressing the button. The sleep timer is now disengaged

and you don't have to change it unless you want a sleep time to

appear.

To activate the sleep timer, turn the radio on and press the POWER &

SLEEP button continuously until the desired sleep time appears. The

radio will play for the speciﬁed length of time and automatically shut

o . The sleep timer symbol will show in the display, "