- ページ 18

ネットワーク・ハードウェア Cisco 2100 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2100 Series 49 ページ。 Cisco 8500 series wireless lan controller
Cisco 2100 Series にも：設定マニュアル (40 ページ), 設定マニュアル (50 ページ), クイック・スタート・マニュアル (12 ページ)

ページを印刷する

If the link does not activate, check the cable. When you are connecting to a hub or a switch,

Note

use a straight-through cable.

Connecting Access Points

After you have configured the controller, use Category-5, Category-5e, Category-6, or Category-7

Ethernet cables to connect up to 6, 12, or 25 Cisco lightweight access points (on Cisco 2106, 2112, or

2125 Wireless LAN Controller) to the network (distribution system) as shown in Figure 5. The

controller has an auto MDI feature, so you can use an MDI-X or MDI cable (crossover or

straight-through) to make the connections.

As soon as the controller is operational, the controller is available to connect access that are scanning

for a controller. When it detects an access point, it records the access point MAC address in its

database. The controller radio resource management (RRM) feature automatically configures the

access point to start transmitting and allowing clients to associate.

You have prepared the controller for basic operation. Refer to the Cisco Wireless LAN Controller

Configuration Guide for information on configuring the controller to meet the specific needs of your

wireless network.